Unit 2,Albion works,Moor Street
Brierley Hill, West Midlands
DY5 3SZ
Brierley Hill, West Midlands
DY5 3SZ
Unit
2,Albion works,Moor Street
Brierley Hill, West Midlands
DY5 3SZ
Brierley Hill, West Midlands
DY5 3SZ
TEL:01384
868080
FAX:01384 482088
FAX:01384 482088
The information above is based on our current knowledge and is
given in good faith; however the company will accept no liability in respect of
any third party reliance thereon.
Other Products
from
P&P Non Ferrous
from
P&P Non Ferrous
TEL:01384
868080
FAX:01384 482088
FAX:01384 482088
Typical chemical composition
| Elements | Min % | Max % |
| Al | 0.005 | |
| Cu | Remainder | |
| Fe | 0.15 | |
| Ni | 0.5 | |
| P | 0.15 | 0.8 |
| Pb | 0.25 | |
| S | 0.05 | |
| Sb | 0.2 | |
| Si | 0.005 | |
| Sn | 11 | 13 |
| Zn | 0.3 | |
Typical Mechanical Properties
| Property/unit | Condition | Temp | Min | Max |
| 0.2% Proof Stress (N/mm2) | Sand Cast | RT | 130 | |
| Tensile Strength (N/mm2) | Sand Cast | RT | 220 | |
| Elongation in 5.65ÖCross Sectional Area | Sand Cast | RT | 3 | |
| Brinell Hardness (HB) | Sand Cast | RT | 75 | |
| 0.2% Proof Stress (N/mm2) | Chill Cast | RT | 170 | |
| Tensile Strength (N/mm2) | Chill Cast | RT | 270 | |
| Elongation in 5.65ÖCross Sectional Area | Chill Cast | RT | 3 | |
| Brinell Hardness (HB) | Chill Cast | RT | 100 | |
| 0.2% Proof Stress (N/mm2) | Continuous | RT | 170 | |
| Tensile Strength (N/mm2) | Continuous | RT | 310 | |
| Elongation in 5.65ÖCross Sectional Area | Continuous | RT | 5 | |
| Brinell Hardness (HB) | Continuous | RT | 100 | |
| 0.2% Proof Stress (N/mm2) | Centrifugal | RT | 170 | |
| Tensile Strength (N/mm2) | Centrifugal | RT | 270 | |
| Elongation in 5.65ÖCross Sectional Area | Centrifugal | RT | 3 | |
| Brinell Hardness (HB) | Centrifugal | RT | 100 | |